Tuesday 2 April 2013

What We Can Learn From Pins

Adam Smith (1723-1790) was - among other things - a pioneer of political economy and the author of 'An Inquiry into the Nature and Causes of the Wealth of Nations'.



So what? you might ask. What's Adam Smith doing here, poking his intricately engraved face into this animation blog?

OK - bear with me, if you will.

Today is my birthday. So far as I'm concerned birthdays are days meant for a little self indulgence, without the guilt. On my last birthday I hijacked this very blog to share with you some of my favourite artists and film-makers. This time I want to share with you my thoughts on.... well, like I say, bear with me if you will.

One of the most famous passages in Adam Smith's book 'The Wealth of Nations' concerns an analysis of how a simple metal pin is manufactured. He figured that to make a pin requires eighteen separate processes, such as drawing out the wire, straightening it, cutting it, pointing it, grinding it to receive the head, and so on... right through to inserting the finished pin into paper, ready for sale. And he worked out that if one person sat and performed all these tasks, operating single-handedly all the necessary machinery, he could barely make more than one finished pin in a day.

But Smith noticed that if ten people were employed and were trained to specialize in just one or two of the eighteen processes that went into the making of a pin, they could collectively make forty-eight thousand pins a day, or the equivalent of four thousand eight hundred pins a day each.

The Industrial Revolution was about to be born...

Fast forward to the the early part of the twentieth century and an animator called Dick Huemer was struggling to meet his deadlines when he realised that rather than sitting down alone to produce the hundreds of drawings required for his scene he could  draw just the main poses and leave the in-between drawings to an assistant - a division of labour that radically increased the amount of animation he could produce each day. The concept of Key Drawings, Inbetweens, and the charts that showed the assistant where to place them, had been invented!


Dick Huemer

By the 1930s animation had moved from being an almost solitary pursuit to a fully industrialised process: writers, producers, directors, concept artists, layout artists, supervising animators, animators, clean-up artists, inbetweeners, and on and on, with each department becoming increasingly specialised. And now, with the development of digital animation, this process of specialisation has increased almost exponentially. Look at the lengthy credits at the end of any major CG film and you'll see a vast army of character builders, riggers, texturers, cloth simulators, hair simulators, pre-lighting technicians, and people with credits I can't even understand. A digital '3D' film now costs, on average, two and a half times more to make than the traditional hand-drawn equivalent did (even adjusting for inflation) and employs two or three times the size of crew, each person with a unique area of expertise.

There is a lot to be said for this process of industrialisation: it drives technology, creates more tools for us to use, creates jobs, and promotes a greater quantity of high quality (at least in terms of craft) films for an increasingly large audience. But there are downsides too: the more expensive movies become to make, the more likely the content will be compromised artistically; and behind the scenes, crew members can begin to feel like ever-shrinking cogs in an ever-expanding machine - each making smaller and smaller marks on a bigger and bigger canvas.

For me, this is where the fun of making a short film comes in: it'll probably take you years to complete your personal labour of love, and you'll probably lose a ton of money doing it, but it is a wonderful chance to roll up your sleeves and get your hands dirty with all the processes that go into the making of a film. During the making of The Last Belle I had a small and wonderful crew of people bringing their talents and crafts to the project. But I also had the chance to dip my hand in everywhere and try a bit of everything. The result: I found that there is something immensely satisfying in being both the director of a project (sitting in my ivory tower, so to speak) whilst also being the guy covered in sweat and paper cuts who has to haul into storage 75 heavy boxes of artwork up a vertical ladder.

Tim Burton, commenting on his early attempts at animation, once said: What I feel really good about, really happy about, is that I did not go to film school. I went to CalArts and went through animation, where I got a very solid education. You learn design, you draw your own characters, your own backgrounds, your own scenes. You cut it, you shoot it. You learn the storyboarding process. It's everything, without the bullshit of film school...

I learnt a lot from making The Last Belle, and had tremendous fun into the bargain. So if you're reading this and you have a hankering to make your own short film - a hankering you haven't quite got around to satisfying yet - I can say this: Get To It! Go on..! Roll up your sleeves and plunge in. It'll probably take you forever, it'll probably eat up all your savings, and on several occasions you'll probably wonder why you ever began... But you surely won't regret it.

You'll bring into the world one single, and one very unique, shiny little pin all of your own.

Good luck. Get to it!


7 comments:

  1. happy birthday man and thank you. Dick Huemers a bad ass.

    ReplyDelete
    Replies
    1. He sure was - would love to have met him...

      Delete
  2. Happy birthday

    A Fan's Cut

    http://afanscut.blogspot.com/

    This is my blog on how Great Films Could Have Been Made Differently.

    if you have time then please take a look.

    I'm also looking to collaborate with a screenwriter.

    Comments are welcome

    Sorry for disturbing,thanks.

    ReplyDelete
    Replies
    1. Interesting ideas. An even tougher brief might be not to change Great films, but improve terrible films..!

      Delete
  3. A day late, but Happy Birthday Neil!

    ReplyDelete
    Replies
    1. Thanks so much Holger! Lovely to hear from you! Hope all is well your end :-)

      Delete